BMW E9 CS / E3 Bavaria ATE Brake Master Cylinder D=23,81MM

Fits the following vehicles:

E12: Details on E12 (Up to 09/1978)
E12 528i Sedan, U.S.
E12 530i Sedan, U.S.
E12 525 Sedan, Euro
E12 528 Sedan, Euro
E12 528i Sedan, Euro
E12 535i Sedan, Euro

E24: Details on E24 
E24 630CSi Coupe, U.S.
E24 633CSi Coupe, U.S.
E24 628CSi Coupe, Euro
E24 630CS Coupe, Euro
E24 633CSi Coupe, Euro
E24 635CSi Coupe, Euro

E3: Details on E3 (From 07/1971 up to 02/1977)
E3 3.0S Sedan, U.S.
E3 3.0SBav Sedan, U.S.
E3 3.0Si Sedan, U.S.
E3 2.8L Sedan, Euro
E3 3.0L Sedan, Euro
E3 3.0Si Sedan, Euro
E3 3.3L Sedan, Euro
E3 3.3Li Sedan, Euro

E9: Details on E9 (From 04/1971 up to 11/1975)
E9 3.0CS Coupe, U.S.
E9 3.0CS Coupe, Euro
E9 3.0CSi Coupe, Euro
E9 3.0CSiL Coupe, Euro
E9 3.0CSL Coupe, Euro

• Short closing paths
• Low volume uptake
• High efficiency
• Low throttling / after-suction resistance
• Low pressure differential between primary and secondary circuits
• Good bleedability
• Cr6-free surfaces for vehicles built from July 2007 (as required by law)
• Central valve version suitable for ABS
• Compact design - ideal for installation in small spaces
• Reduced weight - by roughly 20% compared to conventional central valve technology
• Fewer components - almost half as many as compared to conventional technologies
• Modular system - diameters from 14.29 to 31.75mm and strokes up to 46mm
• Low volume uptake - minimized elastic deformations due to smaller seals
• Sealing cups supported in the housing - robustness against soiling and wear; longer life
• Cr6-free surfaces for vehicles built from July 2007 (as required by law)
• Suitable for ABS